Step by Step Installation Guide of RHEL 7.3

1. First, download and burn RHEL 7.3 ISO image on a DVD or create a bootable USB stick using the correct utility.

Power-on the machine, place the DVD/USB stick in the appropriate drive and instruct UEFI/BIOS, by pressing a special boot key, to boot from the appropriate installation media.

Once the installation media is detected it will boot-up in RHEL grub menu. From here select Install red hat Enterprise Linux 7.3 and press [Enter] key to continue.

RHEL 7.3 Boot Menu

2. The next screen appearing will take you to the welcome screen of RHEL 7.3 From here choose the language that will be used for the installation process and press [Enter] key to move on to the next screen.

Select RHEL 7.3 Language

3. The next screen that will appear contains a summary of all the items you will need to setup for the installation of RHEL. First hit on DATE & TIME item and choose the physical location of your device from the map.

Hit on the upper Done button to save the configuration and proceed further with configuring the system.

RHEL 7.3 Installation Summary

Select RHEL 7.3 Date and Time

4. On the next step, configure your system keyboard layout and the and hit on Done button again to go back to the main installer menu.

Configure Keyboard Layout

5. Next, select the language support for your system and hit Done button to move to the next step.

Choose Language Support

6. Leave the Installation Source item as default because in this case we're performing the installation from our local media drive (DVD/USB image) and click on Software Selection item.

From here you can choose the base environment and Add-ons for your RHEL OS. Because RHEL is a Linux distribution inclined to be used mostly for servers, the Minimal Installation item is the perfect choice for a system administrator.

This type of installation is the most recommended in a production environment because only the minimal software required to properly run the OS will be installed.

This also means a high degree of security and flexibility and a small size footprint on your machine hard drive. All other environments and add-ons listed here can be easily installed afterwards from command line by buying a subscription or by using the DVD image as a source.

RHEL 7.3 Software Selection

7. In case you want to install one of the pre-configured server base environments, such as Web Server, File and Print Server, Infrastructure Server, Virtualization Host or Server with a Graphical User Interface, just check the preferred item, choose Add-ons from the right plane and hit on Done button finish this step.

Select Server with GUI on RHEL 7.3

8. On the next step hit on Installation Destination item in order to select the device drive where the required partitions, file system and mount points will be created for your system.

The safest method would be to let the installer automatically configure hard disk partitions. This option will create all basic partitions required for a Linux system (/boot, /boot/efi and /(root) and swap in LVM), formatted with the default RHEL 7.3 file system, XFS.

Keep in mind that if the installation process was started and performed from UEFI firmware, the partition table of the hard disk would be GPT style. Otherwise, if you boot from CSM or BIOS legacy, the hard drive partition table would be old MBR scheme.

If you're not satisfied with automatic partitioning you can choose to configure your hard disk partition table and manually create your custom required partitions.

Anyway, in this tutorial we recommend that you choose to automatically configure partitioning and hit on Done button to move on.

Choose RHEL 7.3 Installation Drive

9. Next, disable Kdump service and move to network configuration item.

Disable Kdump Feature

10. In Network and Hostname item, setup and apply your machine host name using a descriptive name and enable the network interface by dragging the Ethernet switch button to ON position.

The network IP settings will be automatically pulled and applied in case you have a DHCP server in your network.

Configure Network Hostname

11. To statically setup the network interface click on the Configure button and manually configure the IP settings as illustrated on the below screenshot.

When you finish setting-up the network interface IP addresses, hit on Save button, then turn OFF and ON the network interface in order to apply changes.

Finally, click on Done button to return to the main installation screen.

Configure Network IP Address

12. Finally, the last item you need to configure from this menu is a Security Policy profile. Select and apply the Default security policy and hit on Done to go back to the main menu.

Review all your installation items and hit on Begin Installation button in order to start the installation process. Once the installation process has been started you cannot revert changes.

Apply Security Policy for RHEL 7.3

Begin Installation of RHEL 7.3

13. During the installation process the User Settings screen will appear on your monitor. First, hit on Root Password item and choose a strong password for the root account.

Configure User Settings

Set Root Account Password

14. Finally, create a new user and grant the user with root privileges by checking Make this user administrator. Choose a strong password for this user, hit on Done button to return to the User Settings menu and wait for the installation process to finish.